MoTeC M1 License - JRR Toyota 86 - 2JZ Swap

MoTeC M1 License - JRR Toyota 86 - 2JZ Swap
Click to enlarge
Price: $700.00
Product ID : JRR 23-86-2JZ
E-mail to a friend



JRR Toyota 86/Scion FR-S/Subaru BRZ 2JZ-GTE swap firmware license for MoTeC M1 ECU

  • You can purchase just this firmware license (no ECU purchase required) - perfect for MoTeC dealers

  • This firmware supports installing the 2JZ-GTE engine into the Toyota 86 triplets, while maintaining full OEM body electronics functionality

  • Targeted package specific to one engine saves you money versus buying generic swap package!

  • Available for the M130 and M150 ECU. M170 and M190 version available by special order.

This package is currently used by Ryan Tuerck in his 2JZ-GTE powered Scion FR-S that he campaigns in the Formula Drift series.

This firmware is based upon MoTeC GPR package which includes the following features:

  • Maintains complete OEM operation of Toyota 86/Scion FR-S/Subaru BRZ body electronics - including cruise control (if DBW throttle body is installed on the 2JZ)

  • Flex fuel control - adjust fuel, timing, boost, cold start and more based upon ethanol content

  • Supports running two separate fuel systems - each running a different type of fuel

  • Nitrous control - various parameters supplied to control nitrous. Includes nitrous bottle heater relay control based on nitrous pressure

  • CO2/Wastegate pressure control - controls a fill/bleed solenoid setup to control wastegate pressure

  • Water injection control - with failsafe for boost/timing/fuel based on pressure sensor feedback

  • Air bypass anti-lag control - for increased ALS performance (when used with appropriate engine hardware). The Ryan Tuerck mod!

  • Automatic transmission brake "bump" feature

  • Supports the use of third party lambda controller with 0-5v output

  • Supports momentary buttons

  • Supports direct input from a MoTeC/Racegrade CAN keypad

  • Firmware is specific to the engine/model selected. To change to a different engine requires purchasing a different firmware license. Multiple firmware licenses can be installed on a single ECU.

  • Like anything, the MoTeC M1 requires knowledge and experience to gain the best results. While we are happy to answer technical questions, purchase of this M1 firmware does not come with tuning support. We are happy to quote you tuning for your particular setup, we can refer you to someone in your area, or if you want to DIY (and lack the experience) then we can also quote a training session.

  • This firmware is for closed course competition vehicles only. It does not meet federal emissions requirements.

Base Calibrations - For start up only. Proper tuning is required for your car. Use at your own risk!!!

Product Reviews

Login or Register to write the first review.