MoTeC M1 License - JRR Yamaha YXZ1000R

MoTeC M1 License - JRR Yamaha YXZ1000R
Click to enlarge

More images

Click to enlarge
Price: $700.00
Product ID : JRR 23218
E-mail to a friend



JRR Yamaha YXZ1000R firmware license for MoTeC M1 ECU

  • You can purchase just the JRR Yamaha YXZ firmware license - perfect for MoTeC dealers

  • This firmware package suits 2016 Yamaha YXZ1000R vehicles

  • Targeted package specific to one platform saves you money versus buying GPR!

  • Available for the M130 and M150 ECU. M170 and M190 version available by special order.

  • Read more about the YXZ firmware and complete kit here: JRR YXZ1000R M1 Details 

This firmware is based upon MoTeC GPR-P package and includes the following features:

  • Full control of all engine parameters including fuel, timing, boost (per gear), launch, flat shift, etc with live tuning

  • Complete integration with Yamaha CAN Bus - maintains full OE vehicle operation and dash functionality (stock ECU not needed)

  • Fully controls the factory 4WD system - including an active 4WD control (currently in beta testing)

  • Paddle shift control included - just add suitable paddles and actuator system!

  • Support for staged injection - run a second set of injectors for high power or alcohol fuels

  • Closed loop lambda control - using optional lambda sensor

  • Flex fuel control - adjust fuel, timing, boost, cold start and more based upon ethanol content

  • Supports running two separate fuel systems - each with a different type of fuel

  • Launch control - trigger from vehicle speed or clutch switch (included) or add an external switch

  • Closed loop gear change cut system (with optional sensor) - cut is actively controlled until transmission is in the next gear

  • Nitrous control - various parameters supplied to control nitrous. Includes nitrous bottle heater relay control based on nitrous pressure

  • CO2/Wastegate pressure control - controls a fill/bleed solenoid setup to control wastegate pressure

  • Water injection control - with failsafe for boost/timing/fuel based on pressure sensor feedback

  • Knock control included - simply add a knock sensor to engine and wire to M1 ECU

  • Full control of cooling fan activation points. 

  • Set gear ratios and tire size in software, which maintains proper speedometer operation when changing these items

  • Supports the use of third party lambda controller with 0-5v output

  • Built in 3 axis accelerometer - useful data for chassis setup or just showing off to friends!

  • Supports momentary buttons

  • Supports direct input from a MoTeC/Racegrade CAN keypad

  • You (or your tuner) have full control, at all times, of every aspect of engine operation along with the data to make informed tuning decisions. No more sending ECUs out for a mystery reflash, and hoping it is optimum for your exact setup. Knowledge is power - race (and play) smart!

  • Firmware is specific to the engine/model selected. To change to a different engine requires purchasing a different firmware license. Multiple firmware licenses can be installed on a single ECU.

  • Like anything, the MoTeC M1 requires knowledge and experience to gain the best results. While we are happy to answer technical questions, purchase of this M1 firmware does not come with tuning support. We are happy to quote you tuning for your particular setup, we can refer you to someone in your area, or if you want to DIY (and lack the experience) then we can also quote a training session.

  • This firmware is for closed course competition vehicles only. It does not meet federal emissions requirements.

Base Calibrations - For start up only. Proper tuning is required for your car. Use at your own risk!!!

Product Reviews

Login or Register to write the first review.